Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

HISTORY OF OFFSET PRINTING

The first lithographic offset printing press was created in England around 1875 and was designed for printing on metal. The offset cylinder was covered with specially treated cardboard that transferred the printed image from the litho stone to the surface of the metal. About five years later, the cardboard covering of the offset cylinder was changed to rubber, which is still the most commonly used material.

The first person to use an offset press to print on paper was most likely American Ira Washington Rubel in 1903 . He got the idea accidentally by noticing that whenever a sheet of paper was not fed into his lithographic press during operation, the stone printed its image to the rubber-covered impression cylinder, and the next impression had an image on both sides: direct litho on the front and an image from the rubber blanket on the back. Rubel then noticed that the image on the back of the sheet was much sharper and clearer than the direct litho image because the soft rubber was able to press the image onto the paper better than the hard stone. He soon decided to build a press which printed every image from the plate to the blanket and then to the paper. Brothers Charles and Albert Harris independently observed this process at about the same time and developed an offset press for the Harris Automatic Press Company soon after.

Harris designed his offset press around a rotary letterpress machine. It used a metal plate bent around a cylinder at the top of the machine that pressed against ink and water rollers. A blanket cylinder was positioned directly below, and in contact with, the plate cylinder. The impression cylinder below pressed the paper to the blanket in order to transfer the image to the sheet (see diagram). While this basic process is still used today, refinements include two-sided printing and web feeding (using rolls of paper rather than sheets).

During the 1950s , offset printing became the most popular form of commercial printing as improvements were made in plates, inks and paper, maximizing the technique's superior production speed and plate durability. Today, the majority of printing, including newspapers, is done by the offset process, although digital printing has greatly increased in popularity due to demand and cost advantages for low quantity runs.